Menu
Need Auto Detailing?
Sierra Invisible Shield has added a new feature to our menu...Auto Detailing! Whether you are keeping you car and want to maintain it’s new look, or selling your car and want to get the most value, from the sale. Do what the dealers do “Clean It”
It works for them...
It will also work for you...
Let the experts at Sierra Invisible
Shield provide
the quality care that will beautify your cars interior
and exterior finish!
Care & Maintenance Instructions
Please wait two weeks before your next mechanical car wash. Heavy
water pressure can cause the newly installed protective film to
lift around edges. You may hand wash your vehicle three days after
installation. REMEMBER: All urethane films, will take 4 weeks to
fully cure out depending on seasonal temperatures. Warmer weather
will speed up this process.
During the curing process, you might see a small water bubble, haze or condensation under the film or in a small area that has not settled out with the adhesive curing process. The urethane film cures through a breathing process, the same process as your natural paint surfaces do. The water bubble, haze or condensation will evaporate through the film and cure out over the weeks to come, along with the adhesive bonding process.
1. Keep the film waxed and sealed with PLEXUS.
2. By nature, all paint protection film is porous, this why it’s so important to keep the film sealed with PLEXUS. Dirt, dust, and other air born impurities left on unsealed film will eventually cause the film to become dull. PLEXUS fills in pours of the film and seals it from contaminants.
Use PLEXUS at least 2 times a month or more, to maintain the film. It’s recommended that PLEXUS be applied after every car wash. PLEXUS will not harm the vehicle’s paint.
Use ONLY soap and water to clean the film, and then protect it with PLEXUS
3. Do not use any kind of petroleum-based products on the film.
No Simple Green, 409 bug and tar removers, or any Degreasers.
No products that contain ABRASIVES, or DYES which will cause the film to become dull.
4. ALL PAINT PROTECTION FILM is very susceptible to water spotting. Hard water deposits which are baked on by the sun can not be removed and are not covered under any warranty.
5. It can take up to 4 months for all the moisture to evaporate out from under the film.
6. Within the first 24 hours-Use a lint free rag, and gently press down all the edges of the film.
FAILURE TO MAINTAIN FILM VOIDS ALL WARRANTIES
Contact Us
Sierra Invisible Shield
Dexter & Tom Baker
1645 Crane Way
Sparks, NV 89431
Office (775) 857-2606
Fax: (775) 322-1023
dexter@nvbell.net
Blogs
- Check out our Blog
Yuri Cabrera
Detail Manager
Sierra Invisible Shield now has auto detailing.